My Twitter Favorites


Don’t wait. The time will never be just right...

Tuesday, September 13, 2016

IBPS RRB CWE V Recruitment 2016

Print Friendly and PDF

Finally IBPS, Institute of Banking personnel Selection today released the official notification regarding IBPS RRB V Common Written Examination 2016 for all Eligible Indian candidates for the various Officers Scale & Office Assistants Post. Any Eligible candidate, who aspires to join any of the Participating Regional Rural Banks can fill the form from 14th September 2016 to 30th September 2016. For more information related to Educational Qualification, Age criteria and other Eligibility required for this IBPS RRB V Examination process read the below article carefully. Also must read the official advertisement in detail before online applying.

Examination Name:
IBPS RRB CWE V 2016
Profile Name:
Recruitment of Officers (Scale-I, II & III) and Office Assistants (Multipurpose)

IMPORTANT DATES

Starting date for submitting application forms online is 14th September, 2016.
Last date for submitting application form online 30th September, 2016.
Educational Eligibility :
1) Office Assistant (Multipurpose) -Degree in any discipline from a recognized University or its equivalent. Desirable: Knowledge of Computer skills.

2) Officer Scale-I - Degree in any discipline from a recognized University or its equivalent.

3) Officer Scale-II (General Banking Officer) - Degree in any discipline from a recognized University or its equivalent with a minimum of 50% marks in aggregate.

4) Officer Scale-II SO (IT Officer) – Degree from a recognized University in Electronics / Communication / Computer Science / Information Technology or its equivalent with a minimum of 50% marks in aggregate.

5) Officer Scale-II SO (CA) - Chartered Accountant Certified Associate (CA) from Institute of Chartered Accountants of India.

6) Officer Scale-II (Law Officer) - Degree from a recognized University in Law or its equivalent with a minimum of 50% marks in aggregate.

7) Officer Scale-II (Marketing) - MBA in Marketing from a recognized university.

8) Officer Scale-II SO (Treasury Manager) - Certified Associate (CA) from Institute of Chartered Accountants of India or MBA in Finance from a recognized university/ institution.

9) Officer Scale-II SO (Agriculture)- Degree in Agriculture/ Horticulture/ Dairy/ Animal Husbandry/ Forestry/ Veterinary Science/ Agricultural Engineering/ Pisciculture from a recognized university or its equivalent with a minimum of 50% marks in aggregate.

10) Officer Scale-III - Degree in any discipline from a recognized University or its equivalent with a minimum of 50% marks

 ** Experience required for Officer Scale II and Officer Scale III Posts.
Age Bond :
• For Officer Scale- III- Candidate’s age should be between 21 to 40 years.

• For Officer Scale- II- Candidate’s age should be between 21 to 32 years.

• For Officer Scale- I - Candidate’s age should be between 18 to 30 years.

 For Office Assistant (Multipurpose) - Candidate’s age should be between 18 to 28 years.
Application Fee :
• Officer (Scale I, II & III) - Rs. 100/- for SC/ST/PWD candidates &  Rs. 600/- for all others

• Office Assistant (Multipurpose) - Rs. 100/- for SC/ST/PWD/EXSM candidates. & Rs. 600/- for all others .
Selection Process :
The selection will be based on preliminary & Mains Exam followed by Interview.
How To Apply
Interested Eligible Candidate can apply online through their official website www.ibps.in. from 14th September 2016 to 30th September 2016. After this you cant apply. Before next step please read advertisement carefully :

A) These all posts can be applied by online process. First you have to go on website link given below.


B) Check Posts details which you want to apply, check post details and all information regarding post.

C) Click on online apply button and you will see application form fill this form with truly based information must by following tips in this section.

D) After Apply for post, please fill the application fee from bank or debit card online. Application is not completed without Fee.

E) Now take a 2 copies of application print for further use. And please remembered your application number for furtherest use.
     Must Follow Tips :
    1. Fill Application carefully with true based information must same as 10th class certificate.
    2. Read full advertisement before apply
    3. Use your recent and scanned copy of Photo.
    4. Do not fill artificial information.
    5. Apply soon as possible.

    Download Advertisement/ Online Apply For  IBPS RRB CWE V Recruitment 2016

     Advertisement Here

    Sunday, September 11, 2016

    1500 Computer Awareness Bits For IBPS - Part - 5

    1201) VRML code is based on Unicode
    1202) Use net discussion groups have their own system of organization to help you find things just as internet excel
    1203) Http protocol is used for WWW
    1204) Protocol conversion can be handled by gateway
    1205) In ISDN teleservices, the network can change or process the contents of data
    1206) A longer instruction length may be -1024 to 1023
    1207) A microprocessor is a processor with a reduced instruction set and power requirement
    1208) The term server refers to any device that offers a service to network users
    1209) Using HTML, Front page, DHTML we can make web-site
    1210) Usually security in a network is achieved by cryptography
    1211) PSTN stands for public switched telephone network
    1212) A thyratron cannot be used as a amplifier
    1213) An input device conceptually similar to mouse is joystick
    1214) Netscape navigator and other browsers such as the internet explorer are available free on the internet
    1215) In MS-logo Bye command is used to come out from that screen
    1216) In C++ programming, the command to save the program file is F3
    1217) Data lines which provide path for moving data between system modules are known as data bus
    1218) Bubble sort technique does not use divide and conquer methodology
    1219) The OSI model shows how the network functions of computer to be organized
    1220) A 8 bit microprocessor must have 8 data lines
    1221) A protocol that permits the transfer of files between computer on the network is FIP
    1222) A data structure, in which an element is added and removed only from one end is known as stack
    1223) In linked list, the successive elements must occupy contiguous space in memory
    1224) In OSI model reference, layer 2 lies in between the physical layer and the network layer
    1225) In synchronous TDM, for n signal sources, each frame contains at least n slots
    1226) Mouse and joystick are graphic input devices
    1227) In linked list, a node contains at least node number, data field
    1228) Gopher is not a web browser
    1229) Device drivers controls the interaction between the hardware devices and operating systems
    1230) The shortest path in routing can refer to the least expensive path
    1231) An ordinary pen which is used to indicate locations on the computer screen by sensing the ray of light being emitted by the screen, is called light pen
    1232) Netiquettes are some rules and regulations that have to be followed by users
    1233) Gateway uses the greatest number of layers in the OSI model
    1234) A set of standards by which servers communicate with external programs is called common gateway interface
    1235) UNIVAC is a computer belonging to third generation
    1236) API allows a client/server relationship to be developed between an existing host application and a PC client
    1237) Semi-insulator is a substance which has resistivity in between conductors and insulators
    1238) Multi vibrator is a two stage amplifier with output of one feedback to the input of the other
    1239) Macro is used to automate a particular task or a series of tasks
    1240) Internet is network of networks
    1241) A set of devices or combination of hardware and software that protects the systems on one side from system on the other side is firewall
    1242) Simple, transparent, multi post are bridge types
    1243) When bandwidth of medium exceeds the required bandwidth of signals to be transmitted we use frequency division multiplexing
    1244) Direct or random access of element is not possible in linked list
    1245) In Dos, the “Label” command is used to display the label of disk
    1246) At the lower end of electromagnetic spectrum we have radio wave
    1247) In Word, Ctrl + Del combination of keys is pressed to delete an entire word
    1248) Plotters are very useful in applications such as computer aided design
    1249) Web browser is a type of network application software
    1250) 65535 characters can be typed in a single cell in Excel
    1251) Overtime analysis is useful for formulating personnel policies and derived form the payroll system
    1252) Multiple worksheets can be created and used at a time
    1253) UNIX is both time sharing and multiprogramming system
    1254) Floppy Disk is universal portable and inexpensive but has its own limitation in terms of storage capacity and speed
    1255) Personal computers currently sold in India have main memories at an entry level in the range of megabytes
    1256) UNIX has better security for files relative to MS-DOS
    1257) The UNIX operating system has been written in C language
    1258) Syntax errors is flagged by compilers
    1259) PARAM is an example of super computer
    1260) Mother board holds the ROM, CPU, RAM and expansion cards
    1261) CD-ROM is as a magnetic memory
    1262) The binary number system has a base 2
    1263) GUI is used as an interface between software and user
    1264) E-mail is transaction of letters, messages and memos over communications network
    1265) Device drivers are small , special purpose programs
    1266) LAN refers to a small, single site network
    1267) One megabyte equals approximately 1 million bytes
    1268) Magnetic tape is not practical for applications where data must be quickly recalled because tape is a sequential access medium
    1269) User id, URI and time stamp is not used by organization when a user visits its site
    1270) DBRM takes care of storage of data in a data base
    1271) Plotters give the highest quality output
    1272) Encrypting file system features of windows XP professional operating system protects the data of a user, even if the computer is shared between users
    1273) Loading is not required for high level language program before it is executed
    1274) Top – bottom approach cannot be the measure of network traffic
    1275) Devices such as magnetic disks, hard disks, and compact disks, which are used to store information, are secondary storage devices
    1276) Various input and output devices have a standard way of connecting to the CPU and Memory. These are called interface standards
    1277) The place where the standard interfaces are provided to connect to the CPU and Memory is known as Port
    1278) Binary numbers are positional numbers
    1279) The base of the hexadecimal system is sixteen
    1280) Display capabilities of monitor are determined by adapter card
    1281) Mouse has a use in graphical user interface and applications as input device
    1282) Drum plotter, flat bed plotter, graphic display device is an output device
    1283) The time taken to write a word in a memory is known as write name
    1284) 1 MB is equivalent to 2 (to the power of 20 bytes)
    1285) A memory cell, which does not loose the bit stored in it when no power is supplied to the cell, is known as non-volatile cell
    1286) Magnetic surface recoding devices used in computers such as hard disks, floppy disks, CD-ROMs are called secondary / auxiliary storage devices
    1287) The electronic circuits / devices used in building the computer that executes the software is known as hardware
    1288) Assembler is a translator which translates assembly language program into a machine language program
    1289) Interpreter is a translator which translates high level language program into a machine language program
    1290) Machine language programs are machine dependent
    1291) The programs written in assembly language are machine independent
    1292) High level languages are developed to allow application programs, which are machine independent
    1293) The Vacuum tubes are related to first generation computers
    1294) Mark I was the first computer that used mechanical switches
    1295) First generation computers relied on machine language to perform operations, and they only solve one problem at a time
    1296) In first generation computers input was based on punched cards
    1297) In second generation computers input was based on print outs
    1298) Vacuum tube generates more energy and consumes more electricity
    1299) Second generation computers moved from cryptic binary machine language to symbolic, or assembly languages which allowed programmers to specify instructions in words
    1300) Most electronic devices today use some form of integrated circuits placed on printed circuit boards thin pieces of bakelite or fiberglass that have electrical connections etched onto them is called mother board
    1301) The operating system, which allowed the device to run many different applications at one time with a central program that monitored the memory was introduced in third generation computers
    1302) In third generation computers, users interacted through keyboards and monitors
    1303) The fourth generation computers saw the development of GUIs, the mouse and handheld devices
    1304) First computers that stored instructions in memory are second generation computers
    1305) In second generation computers transistors replaced vacuum tubes
    1306) The micro processor was introduced in fourth generation computer
    1307) Integrated Circuits (IC) are introduced and the replacement of transistors started in third generation computers
    1308) Fifth generation computing is based on artificial intelligence
    1309) Assembly language is low-level language
    1310) In assembly language mnemonics are used to code operations, alphanumeric symbols are used for address, language lies between high-level language and machine language
    1311) The computer’s secondary memory is characterized by low cost per bit stored
    1312) Acknowledgement from a computer that a packet of data has been received and verified is known as ACK
    1313) Acoustic coupler is a communications device which allows an ordinary telephone to be used with a computer device for data transmission
    1314) ALGOL is a high-level language
    1315) A high level programming language named after Ada Augusta, coworker with Charles Babbage is Ada
    1316) Adder is a logic circuit capable of forming the sum of two or more quantities
    1317) To identify particular location in storage area one have a address
    1318) A local storage register in the CPU which contains the address of the next instruction to be executed is referred as address register
    1319) A sequence of precise and unambiguous instructions for solving a problem in a finite number of operations is referred as algorithm
    1320) PC/AT is an example of Bi-directional keyboard interface
    1321) DIMM is not an I/O bus
    1322) PCI bus is often called as mezzanine bus
    1323) 8088 is an original IBM PC inter CPU chip
    1324) 80386 is a 32-bit processor
    1325) A Pentium or Pentium pro board should run at 60 or 66 MHZ
    1326) The maximum bandwidth of EISA bus is 33 M/sec
    1327) A computer system runs millions of cycles per second so that speed is measured in MHz
    1328) Heat sink is the metal device that draws heat away from an electronic device
    1329) Pentium chip has 64 bit & 32 bit registers
    1330) A mother board should contain at least 4 memory sockets
    1331) The 1.2 MB drive spin at 360 rpm
    1332) Intensity of sound is called amplitude
    1333) A single zero bit is called starting bit
    1334) PnP stands for plug and play
    1335) A computers system’s clock speed is measured as frequency
    1336) Maximum RAM of XT type is 1 M
    1337) The data in 8 bit bus is sent along 8 wires simultaneously in parallel
    1338) The bus is simple series of connection that carry common signals
    1339) Mainly memories are divided into two types they are logical memories and physical memories
    1340) System based on the new Pentium II processor have the extended memory limit of 4G
    1341) Full form of EMS memory is excluded memory specification
    1342) The 286 & 386 CPU have 24 address lines
    1343) Bus has both the common meaning and computer meaning
    1344) Data on a floppy disk is recorded in rings called tracks
    1345) A group of characters that have a predefined meaning database
    1346) In a spreadsheet a cell is defined as the intersection of a row and column
    1347) Document file is created by word processing programs
    1348) Real time is not a type of error
    1349) The mouse device drivers, if loaded in the config.sys file, its typically called mouse.sys
    1350) Peer to peer means computer to computer
    1351) RLL refers to run length limits
    1352) The most important aspect of job scheduling is the ability to multiprogramming
    1353) Modem is a modulator-demodulator system
    1354) A data communication system requires terminal device, communication channel, protocols
    1355) The start button appears at the lower left of the screen
    1356) Windows is GUI
    1357) TIF stands for tagged image format
    1358) The first network that initiated the internet is ARPANET
    1359) In modems a digital signal changes some characteristic of a carrier wave
    1360) Favorites are accessible from the start menu
    1361) The virus is a software program
    1362) BANK’S is not memory chip
    1363) We use RAM code to operate EGA
    1364) A scanner is attached to LPT or SCSI host adapter port
    1365) RAM bus is not a bus
    1366) Processor bus is the fastest speed bus in system
    1367) Resolution is the amount of detail that a monitor can render
    1368) Sound blaster is a family of sound cards sold by creative labs
    1369) MIDI is a family of sound cards sold by creative labs
    1370) MIDI is a standard for connecting musical instruments to PC’s
    1371) By connecting a MIDI cable to the joystick port you can connect your PC to a MIDI device
    1372) MPC stands for multimedia personal computer
    1373) Video cards, video and graphics card are example of video & audio
    1374) The display technology used by monitor is CRT
    1375) On a LAN each personal computer is called workstations
    1376) The CPU is the next most important file server after the hard disk
    1377) It is best to use the game adaptor interface on the sound card and disable any other on system
    1378) Mouse port uses keyboard controller
    1379) The number of sectors per track in 1.44 MB floppy disk is 18
    1380) Pentium II system can address 62 G memory
    1381) The mouse was invented by Englebart
    1382) The server’s network adapter card is its link to all the work stations on LAN
    1383) Magnetic drives such as floppy and hard disk drives operate by electro magnetism
    1384) Clock timing is used to determine that start and end of each bit cell
    1385) Head designs are of 4 types
    1386) Latency is the average time that it takes for a sector to be a available after the heads
    1387) Each sector is having 512 bytes
    1388) DDD means digital diagnostic disk
    1389) PC Technical is written in assembly language and has direct access to the system’s hardware for testing
    1390) Check it pro deluxe gives detailed information about the system hardware
    1391) The last 128k of reserved memory is used by mother board
    1392) There are 80 cylinders are there for an 1.44 m floppy
    1393) IBM changed ROM on the system to support key boards
    1394) +12 V signal for disk drive is used for power supply
    1395) CD ROM’s are single sided
    1396) The storage capacity of a CDROM is 650 MB
    1397) XGB has 2048 K graphic memory
    1398) Most sound boards generate sounds by using fm synthesis
    1399) Microscope helps you trouble shoot PS/2 system
    1400) General purpose of diagnostic program run in batch mode
    1401) The routing of data elements are called bits
    1402) Operating system often called as kernel
    1403) IPC stands for inter process communication
    1404) Many programming errors are detected by the hardware
    1405) When a process exists, he operating system must free the disk space used by its memory image
    1406) Buffering attempts to keep both CPU and I/O device busy all the time
    1407) Software is not an example of file mapping
    1408) The most important aspect of job scheduling is the ability to multiprogramming
    1409) There are two types of floppy disks
    1410) System calls can be grouped into three major categories
    1411) “FIFO” stands for first in first out
    1412) In the two-level directory structure, each user has its own user file directory
    1413) The number of bytes in a page is always a power of 2
    1414) A process that does not determinate while the operating system is functionary is called dynamic
    1415) The three main types of computer programming languages are machine language, assembly language, high level language
    1416) There are 2 types of processor modes
    1417) An input device is an electromechanical device that generates data for a computer to read
    1418) The first implementation of UNIX was developed at Bell Telephone Laboratories in the early 1970
    1419) A connection less protocol is more dynamic
    1420) The throughput is a measure of work for processor
    1421) COBOL stands for common business oriented language
    1422) Reset button is used to do cool booting
    1423) In MS-EXCEL the no of rows, no of columns are 16384,256
    1424) FOXPRO is a package and programming language
    1425) Mostly used date format in computer is MM-DD-YY
    1426) Reservation of train ticket uses real time mode of processing
    1427) A floppy disk is a thin plastic disc coated with magnetic oxide
    1428) In binary addition 1+1 = 1
    1429) Universal building blocks of a computer system are NAND & NOR
    1430) In COBOL programming characters length per line is 64
    1431) In FOXPRO, the maximum fields in a record are 128
    1432) QUIT command is used to come out of FOXPRO
    1433) Count command is used to count the specified records in a file with or without condition
    1434) F1 key is pressed for help in FOXPRO
    1435) One Giga byte = 1024 mega bytes
    1436) Small scale integration chip contains less than 12 gates
    1437) The most common monitor sizes are 14, 15, 17
    1438) IBM PC and DOS has BIOS support for 3 LPT ports
    1439) EDO stands for external data organizer
    1440) The number of wires in IDE Hard Disk cable are 16
    1441) If the data transfer rate is 150 k/sec then it is called single speed
    1442) A typical buffer for a CD-ROM drives 156 K
    1443) The 2.88 M floppy drives have 36 no of sectors
    1444) 1 MB is equal to 2 (to the power of 10 KB)
    1445) ROM is a primary storage device
    1446) The process of loading and starting up DOS is called booting
    1447) The Dos Prompt is mainly C:\>
    1448) C:\>ver is used for displaying current version name
    1449) Intel 440x “Natoma” is an example for mother board chipset
    1450) Direct memory access channels are used by medium speed communication devices
    1451) The 486 Sx chip is twice as fast as a 386 Dx with same clock speed
    1452) On a 286 or 386 sx system, the extended memory limits 16M
    1453) The 385 Dx, 386 CPU have 32 address lines
    1454) Shared memory does require 16 K of VMA space
    1455) DIMM’s are 168 pin modules
    1456) The function of +12V power supple is to run disk drive motors and also cooling fans
    1457) SPS generally referred as rechargeable batteries
    1458) Parallel interface is not the interfaces that can be used to connect the mouse to the computer
    1459) The mouse interrupts usually occurs if the system uses a mouse port
    1460) The video adapter BIOS handles communication between the Video Chipset & Video Ram
    1461) Pentium pro CPU’s have full of 323, they can track of 44 G of memory in address lines
    1462) The processor bus is the communications path way between CPU and immediate support chip
    1463) VL-bus can move data 32 bit at a time
    1464) A modem attached to system on COM ports
    1465) Horizontal scan refers to the speed at which the electron beam across the screen
    1466) RGB monitor display 80 column text
    1467) When transition changes from negative to positive the head would detect positive voltage spike
    1468) Animation means to make still picture, move and talk like in cartoon pictures
    1469) Analogues: The use of a system in which the data is of a continuously variable physical quantity such as voltage or angular person
    1470) Animation: A simulation of movement created by displaying a series of pictures or frames
    1471) Application means a piece of software designed to meet a specific purpose
    1472) Active X is a model for writing programs. Active X technology is used to make interactive Web pages that look and behave like computer programs, rather than static pages. With Active X, users can ask or answer questions, use push buttons, and interact in other ways with the web page
    1473) Batch processing is a technique in which a number of similar items or transactions are processed in groups or batches during a machine run
    1474) BIS: Bureau of Indian Standards. It is a national organization of India to define standards
    1475) Browser is a link between the computer and the internet. It’s actually a program that provides a way to look in the hand interact with all information on the internet. A browser is a client program that uses the Hypertext Transfer Protocol (http) to make requests of Web servers throughout the Internet on behalf of the browser user.
    1476) CIO (Chief information officer) : The senior executive in a company responsible for information management and for delivering IT services
    1477) Client/server architecture: A type of network in which computer processing is distributed among many individual PCs and a more powerful, central computer clients can share files and retrieve data stored on the server
    1478) Collaborative software: Groupware, such as Lotus Notes or Microsoft Exchange
    1479) Computer-Aided design: Refers to any computer-enabled method of design also called computer-assisted design.
    1480) Commuter: A group of electronic device used for performing multipurpose tasks
    1481) Channel: It consists of controller card, interface cable and power supply
    1482) CORBA: CORBA is the acronym for Common Object Request Broker Architecture
    1483) CBT: Computer based training
    1484) Certification: Skills and knowledge assessment process
    1485) Computer Crime: The act of stealing, cheating or otherwise defrauding an organization with the use of a computer
    1486) Cyber café: Café offering internet browsing facility
    1487) Cryptography: Method used to protect privacy and security on the internet
    1488) DBMS: An acronym for the database management system. A program that maintains and controls the access to collection of related information in electronic files
    1489) Data: Facts coded and structured for subsequent processing, generally using a computer system
    1490) Digital signature: Encrypted signature used for providing security for the messages/data transferred through the internet
    1491) Digital computer: A device that manipulates discrete data and performs arithmetic and logic operations on these data
    1492) Data transmission: The movement of data from one location of storage to another. If the locations are geographically far away, generally done via satellites.
    1493) Disk Mirroring: The data is written on two or more hard disks simultaneously over the same channel
    1494) Disk Duple Xing: The data is written on two or more hard disks simultaneously over the different channel
    1495) Dumb Terminals: Hardware configuration consisting of a keyboard and monitor that is capable of sending and receiving information but has no memory or processing capabilities.
    1496) Download: Process of transferring a file system from one system to another
    1497) E-commerce: Business transactions conducted over extranets or the internet
    1498) Enterprise, resource planning: An integrated system of operation application combining logistics, production, contract and order management, sales forecasting and financial and HR management
    1499) Electronic data interchange (EDI) : Electronic transmission or documents through point to point connections using a set of standard forms, message and data elements, this can be via leased lines private networks or the internet
    1500) Data processing: It is a method concerning with the systematic recording, arranging, filing, processing and dissemination of facts of business